Impact-Resistant GB15763.2-2005 Standard Toughened Tempered Polished Glass for Glass Displays

TEMPERED SAFETY GLASS

Tempered Safety Glass / Toughened Glass is made by heating flat glass to just below its softening temperature (650 °C) and suddenly chilling it with jets of cold air. It results in the outer skins under powerful compressive stress and the interior with severe tensile stress. This makes it ideal for areas with high wind loads and areas where human contacts are an important consideration.

• Strength: 4-5 times stronger than annealed glass of the same thickness.
• Thermal Stability: Stronger resistance to thermal breakage than annealed or heat-strengthened glass.
• Safety: If breakage occurs, the glass breaks up into small, cubical fragments which are not threatening to humans.
• Standards: Suitable for use as safety glass defined by CPSC 16CFR 1201, ANSI 97.1, and BS6262.
• Applications: Automotive, building facades, shower doors, and tabletop applications.

Available Options:

• Colors: Clear, Extra Clear, Bronze, Grey, Blue and Green etc.
• Size Range: Maximum 2440mm X 8000mm, Minimum 150mm X 300mm.
• Thickness: 3mm, 3.2mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 19mm.